TachAdapter

The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Tachometer Adapter

This small board adapts a Tachometer to up to 4 individual coil packs, capable of handling 4, 6 or 8 cylinder wasted spark applications.

Available for purchase in our Online Store

TachAdapter small.jpg

Installation

Installation:

  • Connect Coil 1,2,3 and 4 to the drive signals to each coil packs as necessary.
    • We recommend 24 gauge wire, but wire gauge is not critical- so long as it fits the module.
  • Connect the tach output to the input of your tachometer.
  • Seal the module with shrink tubing or electrical tape- the board is small enough to integrate into your wire harness / bundle.

Example Wiring

TachAdapter wired small.jpg

Example wiring for a 4 cylinder wasted spark application: yellow wire connects to Tachometer input; red and black wire connect to the drive signals for the coil packs.

Schematics

Tach adapter sch.png